It’s been a few years since I’ve needed to install a version of Windows on a PC for personal use. I have a license for Windows 10 Pro, but today I found out it is no longer possible to get through the installation without first creating an account with Microsoft.
I don’t want to do this. Does anybody have any way to get around it? The stuff I’ve read online basically ends up being create your account switch to a local account after installation and delete your account. I want a better solution. Would installing a much older version of Windows 10 work? The whole reason I got an msdn license back in the day is so I didn’t have to do this.
Edit: 10/2/2023
I thank you all for giving me advice and ideas. Much I had already tried before posting my question here, and some suggestions and experiences led me to keep at it. Here’s my experience for others who have a similar problem.
I downloaded the ISO from Microsoft - Win10_22H2_English_x64v1. I used Ventoy to launch the installer. The first time I went through, I connected to Wi-Fi. As soon as I did that, it sealed my fate. By this time in the process, it installed the boot partition on my HD and saved this information so every time I tried to restart the installer, it always went through language, keyboard, then “enter email address”. All the suggestions for fake values simply triggered “This email is already used. Please choose another”, and that was it.
I was getting ready to wipe the partition and try again, but decided to turn off Wi-Fi in the BIOS first to see if that worked. It did. This time it tried to convince me to set up the network and failed and I was able to create a local account.
The way this multi-version installer works is annoying. It installed Windows Home edition, so I had to “know” that I could go to settings and enter a key. Once I put in the key, it “upgraded” to Pro edition, and I was done.
Next time I have to do this, I’ll see if Rufus works. It seems that will remove some annoyance. Either way, I will avoid configuring Wi-Fi until after install next time. I gotta say, I am not looking forward to the day when I must upgrade to Windows 11. So far I’ve been able to avoid actually buying a new copy due to my aging MSDN key. By the time I’m forced to “upgrade”, I might have to cough up some cash for something I don’t want, but am forced to own.
It should be illegal.
Anyway, now that I know I can still use my MSDN key to get an updated Win 10, I feel a bit more comfortable with re-imaging my Dell laptop from dual-boot to Linux only, then install Windows as a VM for these times I need to use it. Fortunately, that is increasingly rare.
A place to discuss privacy and freedom in the digital world.
Privacy has become a very important issue in modern society, with companies and governments constantly abusing their power, more and more people are waking up to the importance of digital privacy.
In this community everyone is welcome to post links and discuss topics related to privacy.
Some Rules
- Posting a link to a website containing tracking isn’t great, if contents of the website are behind a paywall maybe copy them into the post
- Don’t promote proprietary software
- Try to keep things on topic
- If you have a question, please try searching for previous discussions, maybe it has already been answered
- Reposts are fine, but should have at least a couple of weeks in between so that the post can reach a new audience
- Be nice :)
Related communities
Chat rooms
-
[Matrix/Element]Dead
much thanks to @gary_host_laptop for the logo design :)
- 0 users online
- 84 users / day
- 537 users / week
- 1.5K users / month
- 6.58K users / 6 months
- 1 subscriber
- 2.31K Posts
- 53.4K Comments
- Modlog
I just installed windows 11 without an account, including downloading iCloud on the MS Store, everything i found on internet said it was not possible.
I followed this: https://youtu.be/6UQZ5oQg8XA?si=9i41GVxtjCcP66sE
Here is an alternative Piped link(s):
https://youtu.be/6UQZ5oQg8XA?si=9i41GVxtjCcP66sE
Piped is a privacy-respecting open-source alternative frontend to YouTube.
I’m open-source; check me out at GitHub.
Use RUFUS to flash the installer USB stick, it has all the wantes options also TPM check skipping etc
Next time, I will use that.
Edit: available also for Windows 11
Have you tried installing it with no internet connection? That’s what I always used to do, to get a local account during installation.
I just updated my post with resolution thanks you you and others. I had to turn off Wi-Fi at the hardware level.
Same here, still works
Just unplug the LAN cable, go back one step in the dialog, then forward again. There then should appear the option to make a local account.
Thanks for the tips in this post, very helpful!
Username: a Password: a
Always works for me.
Install Windows 10 LTSC which you can get from massgrave.dev.
This one you can setup without an account.
I’d rather not risk a hacked install if I can. I’ll keep this in my back pocket, though.
LTSC isn’t hacked, it’s an official LTS version
ok, thanks. I’ll check it out, though I solved my problem this time around.
Copy-pasting my own old answer.
Choose any of these 3 options:
A. Shift+F10 (opens cmd) >
OOBE\BYPASSNROB. Continue until getting to creating account
B.1. Account >
123@123.com/test@test.com/a@b.com/1@1.ru/fuckoff@microsoft.com/a@outlook.com/d@d.d/na@na.comB.2. Password > *enter any random password*
C. […] > How would you like to set up this device > Set up for work or school
With an existing system:
• CMD >
net user /add *BTW, I heard that you can use any invalid email address, but I never tried it myself.
Neither of these worked. I know now that was because the installer had installed itself on the boot partition with the Wi-Fi info, so I could not go back and force it to continue without a connection. Plus, all addresses I chose it just told me it’s already used, try another.
Use Rufus to make a local account
Optional: disable privacy option ON
Everyone here should check out Windows X-lite. No accounts required, disabled telemetry, deleted bloatware, options to delete defender and edge before install. You gotta even install .net and c++ redistributables your self. It feels like being on Windows XP again.
Hmm on the last few installs I’ve done (both Win 10 and 11) I just lead the installation to believe I’ll be doing a corporate/domain install & it always lets me create a normal user/password after that. Not necessary to unplug any ethernet/internet or anything of the sort.
It’s always worked for me both at work and at home.
Just to be sure, I spun up a virtual machine to install Windows 10 22H2, here are the steps I went through:
Done! You now installed Windows 10 Pro without a Microsoft Account.
6-8 is not a choice I am given. The installer for Windows 10 is a “multi-release” package. It contains all the distributions, so I cannot download the “pro” version or the “home” version.
Just to be sure, did you download some strange version of the .iso from some non-official source? Or did you modify your Windows install in some way?
And you’re definitely selecting to install Windows 10 Pro, not something else?
I assumed you downloaded the generic .iso direct from Microsoft at https://www.microsoft.com/en-us/software-download/windows10 like most people do. (you can use the browser trick to get the page to give you .iso download options e.g. in Chrome I just hit F12, set the dimensions to something mobile looking, hit F5 to refresh the page, then go ahead & download the .iso)
The generic .iso is indeed a multi with the download option named “Windows 10 (multi-edition ISO)”, that itself doesn’t affect any of the steps above.
Then just use Rufus or similar to create a bootable USB with it.
I installed the most recent installer from microsoft. There’s only one and it covers all the versions.
Earlier today I managed to get it to work by turning off Wi-Fi in BIOS. I’m going to put a brief writeup as an edit to my original message sometime in the next several hours.
The multi-release should let you pick the version in the beginning of the installation.
It did not. Whoops - I already answered this :)
It does not. Once installed, I can “upgrade” by entering my license key. I will write the details as an edit soon.
Instead of an MS account, join a domain and use the domain account to log in. You can set up a domain with Samba.
I’m not given the option. I’m going to have to wipe the drive and start over. I will try using Rufus this time.
You just need to select to “Domain join instead”, there is no need to actually go & set up an actual domain. See my other comment.
Did you get this sorted? I know the following works on 11, and it wouldn’t surprise me if it worked on 10.
First unplug the Ethernet cable, and when it asks for WiFi, press “Shift + F10”. In the opened command prompt type “OOBE\BYPASSNRO”. This will make the installer go to the legacy OOBE (Out Of Box Experience). Finish setup, before finally connecting to the internet. Don’t worry you’re not doing anything dangerous. It’s a simple registry edit.
That did not work on 10.
Not connecting to the internet durring installation will do the trick. (Also try using a debloating script after the installation.)
use Rufus to make the installation media