We have successfully completed our migration to RAM-only VPN infrastructure - Blog | Mullvad VPN
mullvad.net
external-link
Today we announce that we have completely removed all traces of disks being used by our VPN infrastructure!

Today we announce that we have completely removed all traces of disks being used by our VPN infrastructure!

What speaks against torrents with mullvad?

@TheAnonymouseJoker@lemmy.ml
banned
link
fedilink
1
edit-2
4M

removed by mod

No port forwarding.

What do you mean? Is that needed for torrenting?

I have been using mullvad for a month and have 2 tb of Linux isos, should I expect a call from someone?

The BitTorrent protocol basically works like this when you download a torrent:

  1. a tracker has a list of clients that have some data of a torrent
  2. you want to download that torrent, so you ask the tracker for this list
  3. after you receive this list, you ask the clients on this list to upload their data to you
  4. repeat 3. until you have the whole torrent

As soon as you have something downloaded, you become a client on the list of the tracker that theoretically has the torrent available for others. So you would become the “client being asked” of step 3 as well.

But how can you be asked? In a P2P networking context, you can only “be asked” if you have a port open that allows connections to it. Otherwise it’s as if you gave people your home adress but your mailbox has a hole on the bottom that leads directly to the garbage can beneath it, so all mail is immediately lost. Completely unusable.

In other words, it’s (basically) impossible for you to send the torrent data to someone else. You’re a leecher, someone that doesn’t give back to others. If everyone would act like you, torrents wouldn’t work at all.

Eager Eagle
link
fedilink
21Y

In other words, it’s (basically) impossible for you to send the torrent data to someone else.

I don’t know how (in)accurate this description is, but I’ve been seeding hundreds of GB since Mullvad dropped port fwd. Same for the old times when I didn’t bother using a VPN, I never had to enable port forward in my router for it to work.

That’s why I said (basically). If another user has a port open and you connect to them through their open port, a bidirectional connection gets established and then you can also upload. But if the other user also didn’t have a port open, then BitTorrent wouldn’t work. You rely on other people to have ports open, if everyone was using mullvad, then it would stop working.

that’s so weird, that only one of two people need to have an open port. So the person with the closed port can still establish a connection, both upload AND download. However, this process stops the moment the other person closes his port, then NO connection whatsoever can be established? So we’re gonna pretend this makes sense? Or is it about initiating a connection which requires an open port? That’d make a bit more sense

You could read a bit about NAT, which your router does, if you want to know more. But yes, of course only the initiation requires an open port, otherwise like you said, it doesn’t make sense. As soon as a connection is established your router knows where packets should be sent and an “open” port is not necessary.

I know a bit about NATs, or how I like to call it, LAN, basically. But if you don’t even have a NAT to begin with and are directly connected (to your modem), then you don’t even need to open a port. Easy peasy

I have been seeding until I reach a 3 ratio, so am I doing so through my real ip?

Is it visible to copyright holders?

I did bind qbittorrent to the mullvad interface so there is no doubt I am using the VPN, the question is how is it possible that I am reaching a 3 ratio when I shouldn’t be able to seed at all?

Found this apparently other people are seeding as well

Eager Eagle
link
fedilink
21Y

I’ve been downloading and seeding ever since too. People are dismissing / moving away from mullvad for nothing.

@Azzu@lemm.ee
link
fedilink
3
edit-2
1Y

That’s why I said (basically). If another user has a port open and you connect to them through their open port, a bidirectional connection gets established and then you can also upload. But if the other user also didn’t have a port open, then BitTorrent wouldn’t work. You rely on other people to have ports open, if everyone was using mullvad, then it would stop working.

That clarifies the whole thing, thanks

Isn’t this what STUN is for?

@Azzu@lemm.ee
link
fedilink
3
edit-2
1Y

It’s not that simple. Who hosts that server? Which torrent clients implemented support for it? What about symmetric NATs?

In short: no. In long: read up on it yourself.

It’s not needed to leech but it’s pretty important if you want to seed more anonymously

Create a post

A place to discuss privacy and freedom in the digital world.

Privacy has become a very important issue in modern society, with companies and governments constantly abusing their power, more and more people are waking up to the importance of digital privacy.

In this community everyone is welcome to post links and discuss topics related to privacy.

Some Rules

  • Posting a link to a website containing tracking isn’t great, if contents of the website are behind a paywall maybe copy them into the post
  • Don’t promote proprietary software
  • Try to keep things on topic
  • If you have a question, please try searching for previous discussions, maybe it has already been answered
  • Reposts are fine, but should have at least a couple of weeks in between so that the post can reach a new audience
  • Be nice :)

Related communities

Chat rooms

much thanks to @gary_host_laptop for the logo design :)

  • 0 users online
  • 57 users / day
  • 383 users / week
  • 1.5K users / month
  • 5.7K users / 6 months
  • 1 subscriber
  • 2.97K Posts
  • 74.6K Comments
  • Modlog